Dash 3

INTRODUCTION

There are no moving seals in the DASH 3 valve! The DASH 3 is a metal to metal lapped spool valve. Traditional metal to metal valves can be unforgiving and require extremely fine filtration. Dynamco’s design of using dissimilar metals of different hardnesses eliminates the need. DYNAMCO controls the clearances between the body and spool by individually match fitting each spool and body to achieve a proper floating air bearing. The clearance has a narrow range that every valve must achieve. The thermal expansion coefficients of the body and spool are the same so the clearance stays the same over a wide range of conditions.

FEATURES

  • High Speed

    • 4 – 7 ms to Shift

    • 100 Cycles/sec Typical

    • 300 Cycles/sec Achievable

  • Long Life

    • 100,000,000 Typical

    • 300,000,000 Achievable

  • Multiple Voltage / Power Options

    • 5V / 12V / 24V / 115V  (DC & AC)

    • 0.6W Standard

    • 2.5W for 115V Coil

DETAILS

  • 3-Way (3/2)

  • Up to 31 scfm

  • Vacuum to 100 psi

  • Voltage tolerance +15% -10%

  • Rated @ 100,000,000 cycles


 
DASH 3 Single POS Solenoid Electronic

DASH 3 Single POS Solenoid Electronic

DASH 3 POS DIN

DASH 3 POS DIN

 
 
Solenoid ValvesGuest User