Dash 1 Valve

INTRODUCTION

DYNAMCO’S DASH 1 valve family is based on a direct solenoid poppet that can be either a three way (3/2) or a two way (2/2) valve. The DASH 1 is a precision combination of miniature size, fast response, high flow, low power, and long life. There are several valve versions in the DASH 1 family. Cataloged models include: ports in body, manifold mount, adapter plate, PC board mount, and 1/8 pipe-stud output.

FEATURES

  • High Speed

    • 3 – 6 ms to Shift

    • 160 Cycles/sec Typical

    • 500 Cycles/sec Achievable

  • Long Life

    • 100,000,000 Typical

    • 500,000,000 Achievable

  • Multiple Voltage / Power Options

    • 5V / 12V / 24V / 115V (DC & AC)

    • 0.3W / 0.6W / 1.2W / 2.5W

    • Don’t Forget the Rectifier for AC!

DETAILS

  • 2-way (2/2) / 3-Way (3/2)

  • Up to 5 scfm

  • Vacuum to 200 psi

  • Up to 500 Hz

  • Rated @ 100,000,000 cycles


 
Solenoid operator only.jpg
 

Mounting

Ports-in-body+Valve.jpg
 

Ports-in-Body

The DASH 1 Ports-in-Body valve provides inlet, outlet, and exhaust ports suitable for 10-32 or M5 fittings. There are also two sets of holes provided for mounting the valve.

Manifold+Mount+Valve.jpg
 

Manifold Mounting

DASH 1 offers a manifold version which can be mounted as close as .630 inch (16mm) center distance. It features a recessed gasket that will not blow out. The DASH 1 valve can be removed from a manifold by unscrewing the two M3 valve mounting screws.

 

Adapter Mounting

The adapter mounting is useful when the shortest length DASH 1 needs to be mounted to a flat surface. This feature can also be used to adapt the DASH 1 as the operator for another valve.

Connectors

Removable+DIN+connector+.jpg
 

DIN Connector

Use the DIN connector where maximum durability is needed. The terminals on the solenoid operator are also compatible with fast-on type wire terminals. The removable DIN connector must be ordered separately.

Electronic+Connector.jpg
 

Electronic Connector

Use the electronic connector for low profile compact applications. The positive wire is red and the negative wire is black. The removable electronic connector must be ordered separately.

AC+Electronic+Connector.jpg
 

AC Electronic Connector

Electronic connector AC lead wires are supplied complete with electronic connector, circuit module and lead wires. The AC ends should be attached to the terminal strip of the electronic controller and the electronic connector plugged into a DASH 1 solenoid operator.

Manifolds

4+Station+10-32+%5BM5%5D+Supply+Manifold.jpg
 

10-32 (M5) Supply Manifold

This manifold is designed for smaller applications up to 6 valves. The supply can be fed from both ends to provide adequate air flow. There is also an auxiliary gallery that can be used to capture the exhaust of the valves by making a tubing connection to the auxiliary gallery.

Single-sided Manifold

Single-sided Manifold

Double-sided Manifold

Double-sided Manifold

1/8 NPT or 1/8 BSPP Supplies

The single-sided manifold also allows supply from both ends.

The double-sided manifold is similar to the single-sided manifold, but allows valves to be mounted on both sides of the manifold.

In-line Single Manifold

In-line Single Manifold

 

In-Line Single Manifold

This manifold allows users to easily incorporate Dynamco 2-way and 3-way valves into circuits with 1/8” NPT or BSPP connections. In addition to the high speed performance and long life that the DASH 1 delivers, this package also enables easier field maintenance for the end user.

Because the Dynamco assembly is a manifold style, the valve can be replaced without having to remove the manifold assembly from the pipe work, simplifying routine maintenance.

Solenoid ValvesGuest User